Roche Diagnostics
Operator’s Manual · Version 3.1 A-13
Cedex Bio System 1Safety
Safety labels
Safety labels
Read all safety labels on the instrument and equipment.
The following illustration shows where on the instrument labels are displayed.
In addition to safety labels on the instrument, there are safety notes in the
corresponding parts of the Operator’s Manual.
These safety notes give more detailed information about potentially hazardous
situations that may arise during daily operation or when carrying out maintenance
procedures.
When working with the instrument, be sure to observe both the safety labels on the
instrument and the safety notes in the Operator’s Manual.
A This label on the electrode block of the ISE unit indicates that
there is a danger of hazardous situations arising within the vicinity
of this label, which may result in death or serious injury. The rele-
vant laboratory procedures on safe use must be observed.
B This label on the main cover indicates that there are potential bio-
hazards within the vicinity of this label, which may result in death
or serious injury.
The relevant laboratory procedures on safe use must be observed.
Figure A-1 Safety labels on the Cedex Bio instrument
To Next Page
Loading...
Need help?
General
