Roche Cedex Bio System User Manual

Roche Diagnostics
Operator’s Manual · Version 3.1 E-17
Cedex Bio System 13 ISE operation
Daily operation
Daily operation
Daily operation of the ISE unit is integrated in the daily operation of the main
instrument.
e See Chapter 5 Daily operation.
The following table gives an overview of the tasks you might need to perform during
daily operation.
Task Steps Navigation
With wizard As individual steps
1
Starting the system 1. Switch on the system.
2
Logging on the system Overview > Logon
3
Preparing the system Start the Prepare wizard. Overview > Prepare
1. Check the external fluid containers. Overview > >
2. Check the ISE status. Overview >
3. Perform Daily Prepare Actions. Utilities > Maintenance
4
Defining orders Start the Orders wizard. Overview > Order (or Overview > STAT)
1. Identify the sample. n/a
2. Select the tests. n/a
3. Place the sample. n/a
4. Start the run.
5
Monitoring the progress n/a Overview
6
Validating results 1. View results. n/a Workplace > Result Review
2. Handle flagged results. n/a Workplace > Result Review >
... > Repeat
... > Rerun
3. Accept results. n/a Workplace > Result Review > >
Accept
7
Performing calibrations
Performing individual
calibrations
1. Start the wizard. Workplace > Calibrations >
2. Select the test. n/a
3. Prepare and place the calibrators. n/a
4. Start the calibration.
5. Validate the calibration results. Workplace > Calibrations >
6. Remove the calibrators.
Performing
all due calibrations
1. Start the wizard. Workplace > Calibrations >
2. Select all tests with due calibrations.
or
Select all tests with calibration due
within the forecast period.
n/a
3. Prepare and place the calibrators. n/a
4. Start the calibration.
5. Validate the calibration results. Workplace > Calibrations >
6. Remove the calibrators.
Table E-3 Overview of the daily operation tasks

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English