Roche Diagnostics
B-152 Operator’s Manual · Version 3.1
7 Configuration Cedex Bio System
Applications
Short guide to application definitions
Version
The version uniquely identifies a particular set of application definitions.
Code
The Roche application code identifies the application. If you work with a LIS you may
need to map the Roche application code with your own code. All applications,
profiles, and ratios must be identified with an application code. For profiles and
ratios, use a number between 910 and 930 for these codes.
e
See Mapping the host codes on page B-160.
General application definitions
The following tables provide reference information on the meaning and use of application
definitions the user might want to change.
Item Values Comment
Short Name Up to 5 alphanumeric
characters
The short name is used on the screens, for exam-
ple on the test selection screen or the results list.
Long Name Up to 30 alphanu-
meric characters
The long name is a telling description of the test.
It is particularly useful if the short name is not
generally familiar in the laboratory environ-
ment.
Active On, Off Tests that not active are not available for use.
You cannot see them on the screens. Their
application definitions remain on the system.
Test Tabs See Workflow
definitions on
page B-161.
Choose one or several of the buttons. The test
will be included in the corresponding test tabs.
Choose Easy if you work with order mode Easy.
Clear all selections to prevent the test from being
selected in the test selection screens.
Table B-12 General application definitions
To Next Page
Loading...
Need help?
General
