Roche Diagnostics
Operator’s Manual · Version 3.1 B-143
Cedex Bio System 7 Configuration
Applications
Uninstalling applications
Uninstalling an application means making the application unavailable for use in
testing.
You can reinstall an uninstalled application.
e
See Installing applications on page B-137.
Before you can uninstall an application, you need to perform some preparation tasks:
a To prepare uninstalling an application
1
Delete all associated sample results.
e
See Deleting sample results on page B-94.
2
Delete all associated QC results, both from the QC Status list and the QC
History.
e
See Deleting QC results on page B-96.
a To uninstall an application
1
Choose Utilities > Applications > Laboratory Parameters.
2
Select the application.
3
Press .
A confirmation screen is displayed.
4
Press to confirm the action.
All associated calibration results and lot data are deleted.
In the applications list, the application name is enclosed in square brackets, for
example [GLU2], and in the profile details, instead of the short name its
application code is displayed.
The profiles that use this application are removed from the test selection screen. If
you still want to use these profiles, you need to remove the application from them.
e
See Removing tests from a profile on page B-149.
Select an application that is not in square brackets. (Brackets indicate that the applica-
tion is not currently installed.)
To Next Page
Loading...
Need help?
General
