Internet Services
WorkCentreâ„¢ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
21
Internet Services
Internet Services is the embedded HTTP server application that resides in the device. Internet Services
allows Administrators to change network and system settings on the device from the convenience of
their desktops.
Many of the features available within Internet Services will require an Administrator User Name and
Password. The default User Name is admin and the default Password is 1111. A user will only be
prompted for an Administrator’s User Name and Password once in a single browser session.
System Configuration
To use Internet Services, you need to enable both TCP/IP and HTTP on the device. See To Add or
Change a Static IP Address when there is no DHCP Server Available on page 21.
How to Verify the IP Address
The device is configured by default to request an IP Address from a DHCP server. If your DHCP server
provides a valid IP Address you will not need to configure the device with an IP Address. HTTP is also
enabled by default. Print a Configuration Report to verify the IP Address.
To print a Configuration Report on demand, refer to Print a Configuration Report on page 18.
To Add or Change a Static IP Address when there is no DHCP Server Available
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.
1. From the Tools pathway, touch [Network Settings].
2. Touch [Network Setup].
3. Touch [TCP IP].
4. Touch [TCP/IP Settings].
5. Touch [Dynamic Addressing].
a. Touch [Disable] to disable DHCP, and touch [Save] to return to the TCP/IP Settings screen.
6. Touch [IP Address/Host Name], the IP Address/Host Name screen displays.
a. Touch [IPv4 Address] and enter the IPv4 Address using the numerical keypad.
b. Touch [Save] to return to the IP Address/Host Name screen.
c. Touch [Host Name]
d. Touch [Clear Text] and enter the Host Name using the on-screen keyboard.
e. Touch [Save] to return to the IP Address/Host Name screen.
f. Touch [Close] to return to the TCP/IP Settings screen.
7. Touch [Subnet and Gateway].
a. Touch [IP Gateway], and enter a valid IP gateway address using the numerical keypad.
b. Touch [Save] to return to the Subnet and Gateway screen.
To Next Page
Loading...
Need help?
General
