Xerox WorkCentre 5632 System Administrator Guide

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
311
18
Custom Services
Validation Options
The Validation Options feature is used with the Workflow Scanning Validation Server and the Network
Authentication features.
When a user enters their metadata information at the user interface, the metadata is passed to the
validation server to be verified. When Validation Options is enabled, the user’s ID is also passed with
the validation request to the Validation Server. The user ID is recorded when the user enters their
network authentication account details at the user interface.
Enable Validation Options
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Services] link.
2. Click on the [Custom Services] link.
3. Select [Validation Options] in the directory tree.
4. To have the user name sent with the validation request if the user is authenticated at the device
user interface, check the [Include User Name with validation request] checkbox.
5. Click on the [Apply] button.
6. Click on the [OK] button when you see the message “Properties have been successfully
modified”.

Xerox WorkCentre 5632 Specifications

General

Brand	Xerox
Model	WorkCentre 5632
Category	All in One Printer
Language	English