Yealink T5 Series Administrator's Guide

Phone Customization
115
Topic
Notification Popups Configuration
Notification Popups Configuration
The following table lists the parameters you can use to configure notification popups.
Parameter features.voice_mail_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it receives a new voice mail.
If the message disappears, it will not pop up again unless the phone receives a new voice mail or the user
re-registers the account that has unread voice mail(s).
Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Notification Popups->Display Voice Mail Popup
Parameter features.missed_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it misses a call.
Note: It works only if “account.X.missed_calllog” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Notification Popups->Display Missed Call Popup
Parameter features.forward_call_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when it forwards an incoming call to another
party.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Notification Popups->Display Forward Call Popup

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English