Audio Features
287
Note
It is not applicable to the Bluetooth headset and USB headset.
Topic
Headset Prior Configuration
Headset Prior Configuration
The following table lists the parameters you can use to configure headset prior.
Parameter features.headset_prior <y0000000000xx>.cfg
Description
It enables or disables to preferentially use the headset mode for all incoming and outgoing calls.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled, the headset mode will be deactivated after the call, if you switch the headset mode to speak-
erphone/handset mode.
1-Enabled, the headset mode will not be deactivated after the call, even if you switch the headset mode
to speakerphone/handset mode.
Default 0
Web UI Features->General Information->Headset Prior
Dual Headset
Dual headset allows you to use two headsets on one IP phone. To use this feature, you need to physically connect two
headsets to the headset and handset jacks respectively. Once the IP phone connects to a call, the user with the headset
connected to the headset jack has full-duplex capability, while the user with the headset connected to the handset
jack is only able to listen.
Note
Dual headset is not applicable to the Bluetooth headset and USB headset. It is not applicable to CP960 phones.
Topic
Dual Headset Configuration
Dual Headset Configuration
The following table lists the parameter you can use to configure dual headset.
Parameter features.headset_training <y0000000000xx>.cfg
Description
It enables or disables the dual headset feature.
Note: It works only if “features.headset_mode.enable” is set to 1 (Enabled). It is not applicable to CP960
phones.
Permitted
Values
0-Disabled
1-Enabled, users can use two headsets on one phone. When the IP phone joins a call, the users with the
headset connected to the headset jack have a full-duplex conversation, while the users with the headset
connected to the handset jack are only allowed to listen to.
To Next Page
Loading...
Need help?
General
