Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
338
Content-Length: 217
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="4" state="partial" entity-
y="sip:1000@10.2.1.48:5060">
<dialog id="65644">
<state>terminated</state>
</dialog>
</dialog-info>
Topics
Call Completion Configuration
Example: Using Call Completion
Call Completion Configuration
The following table lists the parameters you can use to configure call completion feature.
Parameter features.call_completion_enable <y0000000000xx>.cfg
Description
It enables or disables the call completion feature. If a user places a call and the callee is temporarily
unavailable to answer the call, call completion feature allows notifying the user when the callee becomes
available to receive a call.
Permitted
Values
0-Disabled
1-Enabled, the caller is notified when the callee becomes available to receive a call.
Default 0
Web UI Features->General Information->Call Completion
Phone UI Settings->Features->Call Completion->Call Completion
Example: Using Call Completion
The following example shows the configuration for call completion.
Example
features.call_completion_enable = 1
After provisioning, when you place a call and the callee is temporarily unavailable to answer the call, the phone screen
will prompt whether to wait for the callee party. You can activate the call completion feature. After the called party
becomes idle, the phone screen will prompt whether to dial the number.
Call Park and Retrieve
Call park allows users to park a call on a special extension and then retrieve it from another phone (for example, a
phone in another office or conference room).
The T58V/T58A/T56A phones support the call park feature under the following modes:
To Next Page
Loading...
Need help?
General
