Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
166
Note: It works only if "account.X.reg_failed_retry_min_time" and "account.X.reg_failed_retry_max_time"
are set to 0.
Permitted
Values
Integer from 0 to 1800
Default 30
Web UI Account->Advanced->SIP Registration Retry Timer (0~1800s)
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
[2]
Y is the server ID. Y=1-2.
Registration Settings Configuration
The following table lists the parameters you can use to change the registration settings.
Parameter
account.X.enable_user_equal_phone
[1]
<MAC>.cfg
Description It enables or disables the phone to add “user=phone” to the SIP header of the INVITE message.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->Send user=phone
Parameter
account.X.register_mac
[1]
<MAC>.cfg
Description It enables or disables the phone to add MAC address to the SIP header of the REGISTER message.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->SIP Send MAC
Parameter
account.X.register_line
[1]
<MAC>.cfg
Description
It enables or disables the phone to add a line number to the SIP header of the REGISTER message.
For T58V/T58A/T56A: 0~15 stand for line1~line16;
For CP960: 0 stands for line1.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->SIP Send Line
Parameter
account.X.contact_take_line_param
[1]
<MAC>.cfg
Description It enables or disables the phone to carry the line parameter in the Contact header of the Register message.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
account.X.unregister_on_reboot
[1]
<MAC>.cfg

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English