Yealink T5 Series Administrator's Guide

Phone Network
43
Internet Port and PC Port Configuration
The following table lists the parameters you can use to configure Internet port and PC port.
Parameter
static.network.pc_port.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the PC port.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Auto Negotiation
Default 1
Web UI Network->PC Port->PC Port Active
Parameter
static.network.internet_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description
It configures the network speed over Ethernet of the Internet port.
Note: You can set the transmission speed to 1000Mbps/Auto Negotiation to transmit in 1000Mbps if the
phone is connected to the switch supports Gigabit Ethernet. We recommend that you do not change this
parameter.
Permitted
Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps
Default 0
Web UI Network->Advanced->Port Link->WAN Port Link
Parameter
static.network.pc_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description
It configures the network speed over Ethernet of the PC port.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation). You can set the trans-
mission speed to 1000Mbps/ Auto Negotiation to transmit in 1000Mbps if the phone is connected to the
switch supports Gigabit Ethernet. We recommend that you do not change this parameter. It is not applic-
able to CP960 phones.
Permitted
Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps
Default 0
Web UI Network->Advanced->Port Link->PC Port Link

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English