To Next Page

To Previous Page

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones

Phone User Interface

Central Provisioning

Provisioning Methods Priority

There is a priority for configuration among the provisioning methods - settings you make using a higher priority pro-

visioning method override settings made using a lower priority provisioning method.

The precedence order for configuration parameter changes is as follows (highest to lowest):

Note

The provisioning priority mechanism takes effect only if “static.auto_provision.custom.protect” is set to 1. For more inform-

ation on this parameter, refer to Keeping User’s Personalized Settings Configuration.

Static parameters have no priority. They take effect no matter what method (web user interface or phone user interface

or configuration files) you are using for provisioning.

Static parameters are the parameters that start with a prefix “static.”, for example, the parameters associated with auto

provisioning/network/syslog, TR069 settings and internal settings (the temporary configurations to be used for pro-

gram running).

Web User Interface

You can configure the phones via web user interface, a web-based interface that is especially useful for remote con-

figuration.

Because features and configurations vary by phone models and firmware versions, options available on each page of

the web user interface can vary as well. Note that the features configured via web user interface are limited. Therefore,

you can use the web user interface in conjunction with a central provisioning method and phone user interface.

When configuring the phones via web user interface, you require a user name and password for access. For a user, the

default user name and password are “user” (case-sensitive). For an administrator, the default user name and password

are “admin” (case-sensitive).

Note

When you manually configure a phone via web user interface or phone user interface, the changes associated with non-

static parameters you make will be stored in the MAC-local CFG file. For more information on MAC-local CFG file, refer to

MAC-local CFG File.

Topics

Accessing the Web User Interface

Quick Login Configuration

Web Server Type Configuration

Navigating the Web User Interface

Yealink T5 Series Administrator's Guide

Other manuals for Yealink T5 Series