EasyManuals Logo
Home>Yealink>IP Phone>T5 Series

Yealink T5 Series Administrator's Guide

Yealink T5 Series
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Phone Network
29
Default yealink
Web UI Settings->Auto Provision->DHCP Option Value
PPPoE
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol used by Internet Service Providers (ISPs) to
provide Digital Subscriber Line (DSL) high-speed Internet services. PPPoE allows an office or building-full of users to
share a common DSL connection to the Internet.
PPPoE connection is supported by the IP phone Internet port. Contact your ISP for the PPPoE user name and password.
Topic
PPPoE Configuration
PPPoE Configuration
The following table lists the parameters you can use to configure PPPoE.
Parameter
static.network.pppoe.user
[1]
<y0000000000xx>.cfg
Description
It configures the user name for PPPoE connection.
Note: It works only if the value of the parameter static.network.ip_address_mode is set to 0 (IPv4) or 2
(IPv4 & IPv6), and “static.network.internet_port.type” is set to 1 (PPPoE).
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Basic->IPv4 Config->Configuration Type (PPPoE)->PPPoE->User
Phone UI
Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Type (PPPoE) -
>PPPoE User
Parameter
static.network.pppoe.password
[1]
<y0000000000xx>.cfg
Description
It configures the password for PPPoE connection.
Note: It works only if the value of the parameter static.network.ip_address_mode is set to 0 (IPv4) or 2
(IPv4 & IPv6), and “static.network.internet_port.type” is set to 1 (PPPoE).
Permitted
Values
String within 99 characters
Default Blank
Web UI Network->Basic->IPv4 Config->Configuration Type (PPPoE)->PPPoE->Password
Phone UI
Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->Type (PPPoE) -
>PPPoE Password
[1]
If you change this parameter, the phone will reboot to make the change take effect.
VLAN
The purpose of VLAN configurations on the IP phone is to insert a tag with VLAN information to the packets generated
by the IP phone. When VLAN is properly configured for the ports (Internet port and PC port) on the IP phone, the

Table of Contents

Other manuals for Yealink T5 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T5 Series and is the answer not in the manual?

Yealink T5 Series Specifications

General IconGeneral
BrandYealink
ModelT5 Series
CategoryIP Phone
LanguageEnglish

Related product manuals