Yealink T5 Series Administrator's Guide

Phone Network
49
Web UI Network->Advanced->802.1x->Device Certificates
Parameter
static.network.802_1x.proxy_eap_logoff.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the 802.1x-logoff feature for the PC port.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled, the 802.1x logoff message is sent to the authenticator when the PC is disconnected.
Default 0
[1]
If you change this parameter, the phone will reboot to make the change take effect.
TR-069 Device Management
TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that encompasses
secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE management func-
tions into a common framework. TR-069 uses common transport mechanisms (HTTP and HTTPS) for communication
between CPE and ACS (Auto Configuration Servers). The HTTP(S) messages contain XML-RPC methods defined in the
standard for configuration and management of the CPE.
For more information on TR-069, refer to Yealink TR-069 Technote.
Topics
Supported RPC Methods
TR-069 Configuration
Supported RPC Methods
The following table provides a description of RPC methods supported by the phones.
RPC Method Description
GetRPCMethods This method is used to discover the set of methods supported by the CPE.
SetParameterValues This method is used to modify the value of one or more CPE parameters.
GetParameterValues This method is used to obtain the value of one or more CPE parameters.
GetParameterNames This method is used to discover the parameters accessible on a particular CPE.
GetParameterAttributes This method is used to read the attributes associated with one or more CPE parameters.
SetParameterAttributes This method is used to modify attributes associated with one or more CPE parameters.
Reboot This method causes the CPE to reboot.
Download
This method is used to cause the CPE to download a specified file from the designated loc-
ation.
File types supported by the phones are:
l Firmware Image
l Configuration File
Upload
This method is used to cause the CPE to upload a specified file to the designated location.
File types supported by the phones are:

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English