Yealink T5 Series Administrator's Guide

Phone Customization
125
phone, you can configure “linekey.X.xml_phonebook = 0” to specify the Remote Phone Book 1 “Sell” for
the specific line key. The user can press this line key to access the Remote Phone Book 1 “Sell”.
Note: It is only applicable when “linekey.X.type” is set to 22 or 45.
Permitted
Values
Integer from 0 to 48
Default 0
Web UI Dsskey->Line Key->Line KeyX->Line
Parameter features.flash_url_dsskey_led.enable <y0000000000xx>.cfg
Description
It enables or disables the LED indicator of the URL DSS key.
The LED indicator behavior depends on the response message from the server when you press the URL
DSS key on the phone.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
[1]
X is the line key ID. X=1-27.
Example: Set a Park/Retrieve Key for FAC Call Park Mode
Scenario Conditions Related Topic
features.call_park.park_code = *68
Call Park and Retrieve
features.call_park.park_retrieve_code = *88
features.call_park.park_mode = 1
Example
######Set a Park key######
linekey.1.type = 10
linekey.1.value =4603
linekey.1.label =Bill
######Set a Retrieve key####
linekey.3.type = 56
linekey.3.line =1
linekey.3.value =4603
linekey.3.label =Retrieve Bill
After provisioning, you can easily tap the Park key (line key 1) to park a call to a specific extension (4603) during a call,
and tap the Retrieve key (line key 3) to retrieve the parked call from the specific extension (4603) when the phone is
idle.
If the “linekey.1.value” is set to blank, the park key will perform as the Park soft key.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English