Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
446
Default 0
Web UI Network->Advanced->Span to PC->Span to PC Port
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Watch Dog
The IP phone provides a troubleshooting feature called “Watch Dog”, which helps you monitor the IP phone status and
provides the ability to get stack traces from the last time the IP phone failed. If the Watch Dog feature is enabled, the
phone will automatically reboot when it detects a fatal failure. This feature can be configured using the configuration
files or via web user interface.
Topic
Watch Dog Configuration
Watch Dog Configuration
The following table lists the parameter you can use to configure watch dog.
Parameter static.watch_dog.enable <y0000000000xx>.cfg
Description It enables or disables the Watch Dog feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will reboot automatically when the system crashed.
Default 1
Web UI Settings->Preference->Watch Dog
Analyzing Configuration Files
Wrong configurations may have an impact on phone use. You can export configuration file(s) to check the current con-
figuration of the IP phone and troubleshoot if necessary. You can also import configuration files for a quick and easy
configuration.
We recommend you to edit the exported CFG file instead of the BIN file to change the phone’s current settings. The
config.bin file is an encrypted file. For more information on config.bin file, contact your Yealink reseller.
Topics
Exporting CFG Configuration Files from Phone
Importing CFG Configuration Files to Phone
Exporting BIN Files from the Phone
Importing BIN Files from the Phone
Exporting CFG Configuration Files from Phone
You can export the phone’s configuration file to local and make changes to the phone’s current feature settings. You
can apply these changes to any phone by importing the configuration files via the web user interface.
You can export five types of CFG configuration files to local system:
l <MAC>-local.cfg: It contains changes associated with non-static parameters made via phone user interface and
web user interface. It can be exported only if “static.auto_provision.custom.protect” is set to 1 (Enabled).
To Next Page
Loading...
Need help?
General
