Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
312
Parameter static.security.user_name.var <y0000000000xx>.cfg
Description
It configures the user name of the var for phone’s web user interface access.
Note: It works only if “static.security.var_enable” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default var
Parameter static.security.user_password <y0000000000xx>.cfg
Description
It configures the password of the user or administrator.
The IP phone uses “user” as the default user password and “admin” as the default administrator password.
The valid value format is <username> : <new password>.
Example:
static.security.user_password = user:123 means setting the password of user to 123.
static.security.user_password = admin:456 means setting the password of administrator to 456.
Note: The phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can set the password to
be empty via web user interface only.
Permitted
Values
String within 32 characters
Default Blank
Web UI Security->Password
Phone UI
Settings->Advanced Settings (default password: admin) ->Set Password
Note: You cannot change the user password via phone user interface.
User Access Level Configuration
For more information, refer to Yealink SIP IP Phones Configuration Guide for User Access Level.
The following table lists the parameters you can use to configure the user access level.
Parameter
static.security.var_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the 3-level access permissions (admin, user, var).
Permitted Values
0-Disabled
1-Enabled
Default 0
Parameter
static.web_item_level.url
[1]
<y0000000000xx>.cfg
Description It configures the access URL of the file, which defines 3-level access permissions.
Permitted Values URL within 511 characters
Default Blank
Parameter
static.security.default_access_level
[1]
<y0000000000xx>.cfg
Description
It configures the default access level to access the phone user interface.
Note: It works only if “static.security.var_enable” is set to 1 (Enabled).

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English