Yealink T5 Series Administrator's Guide

Account Settings
179
Default 0
Multiple Line Keys per Account
You can assign multiple line keys to associate with a specific account. The line keys are automatically assigned with
Line type from the first unused one (unused one means the line key is configured as N/A or the associated account is
not registered). All calls on this account will be distributed evenly among these line keys. It is useful for managing a
high volume of calls to an account.
Topics
Multiple Line Keys per Account Configuration
Default Account
Multiple Line Keys per Account Configuration
The following table lists the parameters you can use to configure multiple line keys per account.
Parameter features.auto_linekeys.enable <y0000000000xx>.cfg
Description
It enables or disables to assign multiple line keys to associate with a specific account.
Note: The number of the line keys is determined by “account.X.number_of_linekey”.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->General Information->Auto Linekeys
Parameter
account.X.number_of_linekey
[1]
<MAC>.cfg
Description
It configures the number of line keys to be assigned with a specific account from the first unused one.\
If a line key is in used, the phone will skip to the next unused DSS key.
Permitted
Values
Integer from 1 to 999
The number of the line keys varies by phone models, for the supported line keys, refer to Supported DSS
Keys.
Default 1
Web UI Account->Advanced->Number of line key
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Default Account
If there are multiple accounts registered on the phone, the phone will use the default account to dial out by default.
You can tap the label of the default account on the top-left of the idle screen, and then tap the desired account to be
the new default account. This is only applicable to T58V/T58A/T56A phones.
The following table lists the parameters you can use to configure the default account.
Parameter static.features.default_account <y0000000000xx>.cfg
Description
It configures the default account.
1-Account 1

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English