Yealink T5 Series Administrator's Guide

Phone Customization
127
linekey.1.line =1
linekey.1.value= 4603
linekey.1.label=Bill
After provisioning, you can easily tap the DPickup key (line key 1) to pick up an incoming call to a specific phone
(4603).
Note
The DPickup invokes the directed pickup code by default. Therefore, the phone dials out *974603 to pick up a call. If the dir-
ected code is not set, you can assign code and extension to “linekey.X.value”, for example, “*974603”.
Example: Setting a Line Key as Group Pickup key
The following example shows the configuration for a group pickup key.
Example
linekey.1.type = 23
linekey.1.line =1
linekey.1.value =*98
linekey.1.label =Sell
After provisioning, you can easily tap the GPickup key (line key 1) to pick up an incoming call to any phone within a
predefined group of phones.
Note
If the “linekey.X.value” is not assigned with a group pickup code, the Park key will invoke the group pickup code set by “fea-
tures.pickup.group_pickup_code” or ”account.X.group_pickup_code”.
Example: Setting a Line Key as BLF List key
The following example shows the configuration for a BLF List key.
Scenario Conditions Related Topic
phone_setting.auto_blf_list_enable = 0 BLF List Configuration
Example
linekey.1.type = 39
linekey.1.line =1
After provisioning, a BLF List key displays on line key 1. You can easily use this key to monitor a remote line. The mon-
itored line depends on a pre-configured SIP server.
Example: Setting a Line Key as Private Hold key
The following example shows the configuration for a Private Hold key.
Example
linekey.1.type = 20
linekey.1.label =Private Hold

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English