Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
226
Parameter phone_setting.predial_autodial <y0000000000xx>.cfg
Description It enables or disables the live dialpad feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will automatically dial out the entered phone number on the pre-dialing screen
without tapping a send key.
Default 0
Web UI Settings->Preference->Live Dialpad
Parameter phone_setting.inter_digit_time <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the phone to automatically dial out the entered phone num-
ber without tapping a send key.
Note: It works only if “phone_setting.predial_autodial” is set to 1 (Enabled) and “dial-
plan.digitmap.enable” is set to 0 (Disabled).
Permitted
Values
Integer from 1 to 14
Default 4
Web UI Settings->Preference->Inter Digit Time (1~14s)
Auto Redial
You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both the
number of attempts and waiting time between redials are configurable.
Topic
Auto Redial Configuration
Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
Parameter auto_redial.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically redial the last dialed number when the callee is tem-
porarily unavailable.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->General Information->Auto Redial
Phone UI Settings->Features->Auto Redial->Auto Redial
Parameter auto_redial.interval <y0000000000xx>.cfg
Description
It configures the interval (in seconds) for the phone to wait between redials.
The IP phone redials the last dialed number at regular intervals till the callee answers the call.
Permitted
Values
Integer from 1 to 300

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English