Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
74
Values
Default
For T58V/A phones: T58.
For T56A phones: T56A.
For CP960 phones: CP960.
Static Provision Configuration
To use the static provision method, you need to obtain the provisioning server address first when configuring a pro-
visioning server.
The provisioning server address can be IP address, domain name or URL. If a user name and password are specified as
part of the provisioning server address, for example, http://user:pwd@server/dir, they will be used only if the server
supports them.
Note
A URL should contain forward slashes instead of backslashes and should not contain spaces. Escape characters are not sup-
ported.
If a user name and password are not specified as part of the provisioning server address, the User Name and Password
of the provisioning server configured on the phone will be used.
The following table lists the parameters you can use to configure static provision.
Parameter static.auto_provision.server.url <y0000000000xx>.cfg
Description It configures the access URL of the provisioning server.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Settings->Auto Provision->Server URL
Parameter static.auto_provision.server.username <y0000000000xx>.cfg
Description It configures the user name for provisioning server access.
Permitted
Values
String within 32 characters
Default Blank
Web UI Settings->Auto Provision->User Name
Parameter static.auto_provision.server.password <y0000000000xx>.cfg
Description It configures the password for provisioning server access.
Permitted
Values
String within 32 characters
Default Blank
Web UI Settings->Auto Provision->Password
To Next Page
Loading...
Need help?
General
