Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
352
Default Blank
Web UI Account->Advanced->Call Pull Feature Access Code
Parameter features.barge_in_via_username.enable <y0000000000xx>.cfg
Description
It enables or disables the INVITE request with the user name of the account when this account barges in
an active call.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the secretary. You can
press the intercom key to place a call to a contact that is answered automatically on the contact's phone as long as the
contact is not in an active call. In addition, the intercom key can be used for monitoring the status changes of a spe-
cific line on the phone.
Topics
Intercom Key Configuration
State Monitor for Intercom Contact
Outgoing Intercom Configuration
Incoming Intercom Configuration
Intercom Key Configuration
You can configure an Intercom key to provide users the ability to initiate intercom calls directly to the specified con-
tact.
The following shows configuration for an Intercom key.
Line Key Configuration Programmable Key Configuration
linekey.X.type = 14
linekey.X.line = 1
linekey.X.value = 4603
linekey.X.label = Bill
programablekey.X.type = 14
programablekey.X.line = 1
programablekey.X.value = 4603
After provisioning, an Intercom key for Bill (4603) is available on the phone. You can tap the Intercom key to place an
intercom call to Bill (4603).
If you want to use the Intercom key to pick up a call, you need to enable the Intercom key to monitor state changes,
and configure the pickup code for the Intercom key, for example, set “linekey.X.extension = *97” or “pro-
gramablekey.X.extension = *97“. When the monitored user Bill (4603) receives an incoming call, you can tap the Inter-
com key to pick up the call to Bill (4603) directly.
Note
You cannot use a programmable key to monitor an intercom contact for state changes, but tap it to pick up a call.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English