Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
268
Phone UI Settings->Basic Settings->Sound->Ring Tones->Account X
Parameter ringtone.url <y0000000000xx>.cfg
Description It configures the access URL of the custom ring tone file.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Settings->Preference->Upload Ringtone
Parameter ringtone.delete <y0000000000xx>.cfg
Description It deletes all custom ring tone files.
Permitted
Values
http://localhost/all
Default Blank
Parameter phone_setting.ringing_timeout <y0000000000xx>.cfg
Description
It configures the duration time (in seconds) in the ringing state.
If it is set to 180, the phone will stop ringing if the call is not answered within 180 seconds.
Permitted
Values
Integer from 0 to 3600
Default 120
Parameter phone_setting.ring_for_tranfailed <y0000000000xx>.cfg
Description
It configures the ring tone when the IP phone fails to transfer a call and display "Transfer failed" on the
screen.
Permitted
Values
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav or
Splash.wav
Default Ring1.wav
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Distinctive Ring Tones
The feature of distinctive ring tones allows certain incoming calls to trigger the phones to play distinctive ring tones.
The IP phone inspects the INVITE request for an "Alert-Info" header when receiving an incoming call. If the INVITE
request contains an "Alert-Info" header, the phone strips out the URL or keyword parameter and maps it to the appro-
priate ring tone.
Note
If the caller already exists in the local directory, the ring tone assigned to the caller should be preferentially played.
Topics
Supported Alert-Info Headers Format
Distinctive Ring Tones Configuration

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English