Yealink T5 Series Administrator's Guide

Call Features
261
Default Blank
Web UI Directory->Multicast IP->Paging List->Paging Address
Phone UI Settings->Features->Paging List->Option->Edit->Address
Parameter
multicast.paging_address.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the name of the multicast paging group to be displayed in the paging list. It will be dis-
played on the phone screen when placing the multicast paging calls.
Permitted
Values
String
Default Blank
Web UI Directory->Multicast IP->Paging List->Label
Phone UI Settings->Features->Paging List->Option->Edit->Label
Parameter
multicast.paging_address.X.channel
[1]
<y0000000000xx>.cfg
Description It configures the channel of the multicast paging group in the paging list.
Permitted
Values
0-all the Yealink phones running firmware version 80 or earlier or Yealink phones listen to channel 0 or
third-party available devices (for example, Cisco phones) in the paging group can receive the RTP stream.
1 to 25-the Polycom or Yealink phones preconfigured to listen to the channel can receive the RTP
stream.
26 to 30-the Yealink phones preconfigured to listen to the channel can receive the RTP stream.
Default 0
Web UI Directory->Multicast IP->Paging List->Paging Address->Channel
Phone UI Settings->Features->Paging List->Option->Edit->Channel
[1]
X ranges from 1 to 31
Multicast Listening Group Configuration
Yealink phones support up to 31 groups for listening. You can assign multicast IP address with a channel for each
group, and specify a label to each group to identify the phones in the group, such as All, Sales, or HR.
The following table lists the parameters you can use to configure the multicast listening group.
Parameter
multicast.listen_address.X.ip_address
[1]
<y0000000000xx>.cfg
Description
It configures the multicast address and port number that the phone listens to.
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Permitted
Values
IP address: port
Default Blank
Web UI Directory->Multicast IP->Multicast Listening->Listening Address
Parameter
multicast.listen_address.X.label
[1]
<y0000000000xx>.cfg
Description It configures the label to be displayed on the phone screen when receiving the multicast paging calls.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English