Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
208
Attributes Description
DialNowRule Specify the dial-now number.
LineID
Specify a registered line to apply the dial-now rule.
Valid Values:
0~16 (T58V/T58A/T56A)
0, 1 (CP960)
0 stands for all lines;
1~16 stand for line1~line16 (T58V/T58A/T56A)
1 stand for line1 (CP960)
Multiple line IDs are separated by commas.
Customizing the Dial Now File
1. Open the dial now file.
2. To add a dial-now rule, add <Data DialNowRule="" LineID="" /> to the file. Each starts on a new line.
3. Specify the values within double quotes.
For example,
<Data DialNowRule="1001" LineID="0" />
4. Save the changes and place this file to the provisioning server.
Replace Rule Configuration
You can configure replace rules either one by one or in batch using a replace rule template.
The following table lists the parameters you can use to configure replace rule.
Parameter
dialplan.replace.prefix.X
[1]
<y0000000000xx>.cfg
Description
It configures the entered number to be replaced.
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 32 characters
Default Blank
Web UI Settings->Dial Plan->Replace Rule->Prefix
Parameter
dialplan.replace.replace.X
[1]
<y0000000000xx>.cfg
Description
It configures the alternate number to replace the entered number.
The entered number is configured by "dialplan.replace.prefix.X".
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 32 characters
Default Blank

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English