Yealink T5 Series Administrator's Guide

Troubleshooting Solutions
451
Troubleshooting Solutions
This section describes solutions to common issues that may occur while using the IP phone. Upon encountering a case
not listed in this section, contact your Yealink reseller for further support.
Topics
IP Address Issues
Time and Date Issues
Display Issues
Phone Book Issues
Audio Issues
Wi-Fi and Bluetooth Issues
Firmware and Upgrading Issues
System Log Issues
Password Issues
Logo Issues
Power and Startup Issues
Other Issues
IP Address Issues
The IP phone does not get an IP address
Do one of the following:
If your phone connects to the wired network:
l Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and the Ethernet cable is not loose.
l Ensure that the Ethernet cable is not damaged.
l Ensure that the IP address and related network parameters are set correctly.
l Ensure that your network switch or hub is operational.
l Ensure that the Wi-Fi feature is disabled.
If your phone connects to the wireless network:
l If the network is secure, ensure the entered password is correct.
l Ensure your gateway/router enables the wireless network feature.
Solving the IP conflict problem
Do one of the following:
l Reset another available IP address for the IP phone.
l Check network configuration via phone user interface at the path Settings->Advanced Settings (default password:
admin) ->Network->WAN Port->IPv4 (or IPv6). If the Static IP is selected, select DHCP instead.
Specific format in configuring IPv6 on Yealink phones
Scenario 1:
If the IP phone obtains the IPv6 address, the format of the URL to access the web user interface is “[IPv6 address]” or
“http(s)://[IPv6 address]”. For example, if the IPv6 address of your phone is “fe80::204:13ff:fe30:10e”, you can enter the

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English