Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
72
l Zero Touch: Zero Touch feature guides you to configure network settings and the provisioning server address via
phone user interface after startup.
l PnP: PnP feature allows the phones to discover the provisioning server address by broadcasting the PnP SUBSCRIBE
message during startup.
l DHCP: DHCP option can be used to provide the address or URL of the provisioning server to phones. When the IP
phone requests an IP address using the DHCP protocol, the resulting response may contain option 66 (for IPv4) or
the custom option (if configured) that contains the provisioning server address.
l Static: You can manually configure the server address via phone user interface or web user interface.
Topics
Zero Touch Provision Configuration
PnP Provision Configuration
DHCP Provision Configuration
Static Provision Configuration
Zero Touch Provision Configuration
The following table lists the parameters you can use to configure Zero Touch provision.
Parameter static.zero_touch.enable <y0000000000xx>.cfg
Description
It enables or disables the zero touch for the phone to configure the network parameters and provisioning
server address via phone user interface during startup.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Auto Provision->Zero Active
Parameter static.zero_touch.wait_time <y0000000000xx>.cfg
Description It configures the duration time (in seconds) for the phone to display Zero Touch screen during startup.
Permitted
Values
Integer from 1 to 100
Default 5
Web UI Settings->Auto Provision->Wait Time(1~100s)
Parameter static.zero_touch.network_fail_wait_times <y0000000000xx>.cfg
Description It configures the reconnection times when zero touch module fails to obtain network parameters.
Permitted
Values
Integer from 1 to 2147483646
Default 8
Parameter static.zero_touch.network_fail_delay_times <y0000000000xx>.cfg
Description
It configures the duration time (in milliseconds) of every reconnection when zero touch module fails to
obtain network parameters.
Permitted
Values
Integer from 1000 to 2147483646
Default 1000

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English