Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
304
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->MOS-CQ
Central Report Collector
To operate with central report collector, the phones must be configured to forward their voice quality reports to the
specified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration
Central Report Collector Configuration
The following table lists the parameters you can use to configure central report collector.
Parameter
account.X.vq_rtcpxr.collector_name
[1]
<MAC>.cfg
Description
It configures the host name of the central report collector that accepts voice quality reports contained in
SIP PUBLISH messages.
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->VQ RTCP-XR Collector Name
Parameter
account.X.vq_rtcpxr.collector_server_host
[1]
<MAC>.cfg
Description
It configures the IP address of the central report collector that accepts voice quality reports contained in
SIP PUBLISH messages.
Permitted
Values
IPv4 Address
Default Blank
Web UI Account->Advanced->VQ RTCP-XR Collector Address
Parameter
account.X.vq_rtcpxr.collector_server_port
[1]
<MAC>.cfg
Description
It configures the port of the central report collector that accepts voice quality reports contained in SIP
PUBLISH messages.
Permitted
Values
Integer from 1 to 65535
Default 5060
Web UI Account->Advanced->VQ RTCP-XR Collector Port
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Silent Mode
You can use silent mode feature to block the incoming call/message from producing ring tone/notification tone from
phone's speaker. It is helpful for users not to be disturbed by the tone.
Yealink phones support the following three methods to enable the silent mode feature:

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English