Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
404
Values
Default Blank
[1]
X is the slave phone ID. X = 1-3.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Related Topic
Example: Configuring CP960 Star Connection Feature
Example: Configuring CP960 Star Connection Feature
Scenario Conditions
l The MAC address of phone A is 805EC0092F33.
l The MAC address of phone B is 805EC0092F4B.
l The MAC address of phone C is 805EC009223B.
l The MAC address of phone D is 805EC0033E2B.
l All the phones are in the same subnet, and are running the same firmware versions.
You want phone A to act as a master phone, and phone B, phone C and phone D act as the slave phones.
The following example shows configuration for the phones:
Example
######For Phone A (master phone)######
features.cp_star_connection.master.enable=1
features.cp_star_connection.slave.1.mac=805EC0092F4B
features.cp_star_connection.slave.2.mac=805EC009223B
features.cp_star_connection.slave.3.mac=805EC0033E2B
######For Phones B、C、D (slave phones)######
features.cp_star_connection.master.enable=0
features.cp_star_connection.master.mac=805EC0092F33
After reboot, phone A, B, C, D are in a star connection group.
To Next Page
Loading...
Need help?
General
