Yealink T5 Series Administrator's Guide

Call Features
251
Default Blank
Web UI Features->Forward&DND->Forward->No Answer Forward->Off Code
Phone UI Settings->Features->Call Forward->No Answer Forward->Off Code
Call Forward in Custom Mode Configuration
The following table lists the parameters you can use to configure call forward in Custom mode. It is not applicable to
CP960 phones.
Parameter
account.X.always_fwd.enable
[1]
<MAC>.cfg
Description
It triggers always forward feature to on or off.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the parameter “features.fwd_
mode” is set to 1 (Custom). It is not applicable to CP960 phones.
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.always_fwd.target”) immediately.
Default 0
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->On/Off
Phone UI Settings->Features->Call Forward->AccountX->Always Forward->Always Forward
Parameter
account.X.always_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the always forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the parameter “features.fwd_
mode” is set to 1 (Custom). It is not applicable to CP960 phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->Target
Phone UI Settings->Features->Call Forward->AccountX->Always Forward->Forward To
Parameter
account.X.always_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the always forward on code to activate the server-side always forward feature.
The phone will send the always forward on code and the pre-configured destination number (configured
by the parameter “account.X.always_fwd.target”) to the server when you activate always forward feature
on the phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1 (Cus-
tom). It is not applicable to CP960 phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->On Code
Phone UI Settings->Features->Call Forward->AccountX->Always Forward->On Code

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English