Yealink T5 Series Administrator's Guide

Audio Features
277
Condition Description
Dial Recall When receiving a call back
Info When receiving a special message
Stutter When receiving a voice mail (For more information on voice mail tone, refer to Alert Tone)
Auto
Answer
When automatically answering a call (For more information on auto answer, refer to Auto Answer)
Tones Configuration
The following table lists the parameters you can use to configure tones.
Parameter voice.tone.country <y0000000000xx>.cfg
Description It configures the country tone for the phones.
Permitted
Values
Custom, Australia, Austria, Brazil, Belgium, Chile, China, Czech, Czech ETSI, Denmark, Finland, France, Ger-
many, Great Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico, New Zealand, Netherlands,
Norway, Portugal, Spain, Switzerland, Sweden, Russia, United States
Default Custom
Web UI Settings->Tones->Select Country
Parameter voice.tone.dial <y0000000000xx>.cfg
Description
It customizes the dial tone.
tone list = element[,element] [,element]…
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
Freq: the frequency of the tone (ranges from 200 to 4000 Hz). If it is set to 0 Hz, it means the tone is not
played.
Duration: the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms.
You can configure at most eight different tones for one condition, and separate them by commas. (for
example, 250/200,0/1000,200+300/500,200+500+800+1500/1000).
If you want the IP phone to play tones once, add an exclamation mark “!” before tones (for example,
!250/200,0/1000, 200+300/500,200+500+800+1500/1000).
Note: It works only if “voice.tone.country” is set to Custom. It is not applicable to CP960 phones
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Dial
Parameter
features.partition_tone
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to play the different dial tones when there is no active account.
Note: It works only if “voice.tone.dial” is configured. It is not applicable to CP960 phones.
Permitted
Values
0-Disabled

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English