Yealink T5 Series Administrator's Guide

Phone Customization
147
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable” are set to 1
(Enabled). It is not applicable to CP960 phones.
Permitted
Values
String
Default EDK Prompt
[1]
X is the prompt ID. X=1-10.
EDK Soft Keys Configuration
You can customize the soft keys as need. This feature is typically used to access frequently-used functions or to create
menu shortcuts to frequently-used phone settings.
Custom soft keys can be added in the following phone states:
l Idle - There are no active calls on the phone.
l Alerting (or ringing) – There is an incoming call on the phone.
l Connecting – There is an outgoing call on the phone. Moreover, the call is connecting.
l Transfer connecting – There is a call being transferred to another phone. Moreover, the call is connecting.
l Talk – There is an active call on the phone.
l Call failed – The outgoing call encounters a failure.
l Ring back - There is an outgoing call on the phone. Moreover, the phone is in the ringback state.
l Transfer ring back - There is a call being transferred to another phone. Moreover, the phone is in the ringback
state.
l Hold – The call is placed on hold on the phone.
l Held – The call is held.
l Conference – The phone sets up a conference call.
Note
Configuring the custom soft keys may affect the softkey layout in different call states. For more information on softkey lay-
out, refer to Softkey Layout.
The following table lists the parameters you can use to configure EDK soft keys.
Parameter
softkey.X.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X.
Note: It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled). It is not applicable to
CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
softkey.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the text displayed on the soft key label.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
It is not applicable to CP960 phones.
Permitted
Values
String

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English