Yealink T5 Series Administrator's Guide

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
386
Handset Name
The handset will be assigned a name by default if successfully registered to the phone. You can personalize the hand-
set name.
Topic
Handset Name Configuration
Handset Name Configuration
The following table lists the parameter you can use to configure the handset name.
Parameter
handset.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the name of the handset.
Note: If it is set to blank, it will display the corresponding default handset name.
Permitted Values String within 24 characters
Default
The handset name for handset 1 is T58 Phone.
The handset name for handset 2 is Handset 2.
The handset name for handset 3 is Handset 3.
The handset name for handset 4 is Handset 4.
The handset name for handset 5 is Handset 5.
Web UI
Status->Handset->Handset Name->Handset X
[1]
Handset UI OK->Settings->Handset Name
Phone UI
DECT Settings->Handsets->Handset X
[1]
[1]
X is the handset ID. X=2-5.
Number Assignment
After the wireless handset is registered to the phone, you can assign one or more outgoing lines or incoming lines for
the handset. The phone acts as the Handset 1 (T58 Phone).
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned to the
handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line of the
handset.
The handset can only receive incoming calls of the assigned incoming line(s). You can assign incoming lines to all
handsets that are registered to the same phone.
Topic
Number Assignment Configuration
Number Assignment Configuration
The following table lists the parameters you can use to assign lines.
Parameter
handset.X.incoming_lines
[1]
<y0000000000xx>.cfg

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English