Yealink T5 Series Administrator's Guide

Configuration Parameters
429
Broadsoft Call Park
Parameter features.call_park.group_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the GPark soft key during a call.
Note: If it is set to 1 (Enabled), the Retrieve soft key will also be displayed on the dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Call Pickup->Group Call Park (if bw.enable =1)
Parameter features.call_park.park_ring <y0000000000xx>.cfg
Description
It enables or disables the phone to play a warning tone when a call is parked against its line.
Note: It works only if “features.call_park.park_visual_notify_enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Call Pickup->Audio Alert for Parked Call (if bw.enable =1)
Parameter features.call_park.park_visual_notify_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display a parked indicator when a call is parked against its line.
Note: It is not applicable to CP960 phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Call Pickup->Visual Alert for Parked Call (if bw.enable =1)
Parameter features.call_park.group_park_code <y0000000000xx>.cfg
Description
It configures the group call park code for the GPark soft key.
Note: It works only if “features.call_park.park_mode” is set to 1 (FAC).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Call Pickup->Group Call Park Code (if bw.enable =1)
Parameter
sip.call_park_without_blf
[1]
<y0000000000xx>.cfg
Description It enables or disables the phone to close the BLF monitoring feature for call park DSS key.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
account.X.callpark_enable
[2]
<MAC>.cfg
Description It enables or disables call park subscription.
Permitted
0-Disabled

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English