Yealink T5 Series Administrator's Guide

Directory
203
Directory List File Attributes
The following table lists the attributes you can use to add contact lists to the directory list file. We recommend you do
not edit these attributes.
Attributes Valid Values Description
id_name
localdirectory
networkcalllog
remotedirectory
ldap
broadsoftdirectory
uc_buddies (not applicable to CP960 phones)
mobilecontant (not applicable to CP960 phones)
blacklist
googledirectory
The existing directory list (For example, “loc-
aldirectory” for the local directory list).
Note: Do not edit this field.
display_
name
Local Directory
Network CallLog
Remote Phone Book
LDAP
Network Directories
Buddies (not applicable to CP960 phones)
Mobile Contacts (not applicable to CP960 phones)
Blacklist
Google Contact
The display name of the directory list.
Note: We recommend you do not edit this
field. Network Directories is hidden for
phones in GA firmware, GA firmware which
is designed for the BroadWorks envir-
onment.
priority
1 to 6 (for CP960)
1 to 8 (for T58V/T58A/T56A)
For CP960:
1 is the highest priority, 6 is the lowest.
For T58V/T58A/T56A:
1 is the highest priority, 8 is the lowest.
The display priority of the directory list.
enable
0/1
0: Disabled
1: Enabled
Whether to display this list when you press
Directory (Dir) on the phone.
Customizing Directory List File
1. Open the directory list XML file.
2. To configure each directory list, edit the values within double quotes in the corresponding field.
For example, enable the local directory, disable the history and specify a priority.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English