13185L-002 Rev. A 1/24/06 110XiIIIPlus Maintenance Manual Page 1-7
System Description Section 1
Ribbon Considerations
Printer Considerations
General Specifications
Ribbon Specifications 110XiIIIPlus-Series
Ribbon width
(To protect the printheads from wear, Zebra
recommends using ribbon at least as wide as
the media you are using.)
Maximum
Inches
′= feet
mm
m= meter
4.33 110
Minimum
0.79 20
Standard lengths 2:1 media to ribbon roll ratio
984′
300 m
3:1 media to ribbon roll ratio
1476′
450 m
Roll size Inner diameter of core
1.0 25.4
Outside diameter of full ribbon roll
3.2 81.3
Ribbon wound coatedside out
Printing Specifications 203 dpi 300 dpi 600 dpi
Resolution
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
600 dots/inch
(23.5 dots/mm)
Dot size (square)
0.0049 × 0.0049
(0.125 × 0.125)
0.0033 × 0.0039
(0.084 × 0.100)
0.0016 × 0.0016
(0.042 × 0.042)
First dot location
0.10 ±0.035
(2.5 ±0.9)
0.023 ±0.035
(0.6 ±0.9)
0.023 ±0.035
(0.6 ±0.9
Max print width 4.09 (104) 3.4 (86) 3.2 (81)
Print length
(max)
Non-continuous
printing
Memory 39 (991) 39 (991) 20 (508)
16 MB standard
32 MB optional max.
39 (991) 39 (991) 39 (991)
Continuous
printing
16 MB standard
150(3810) 80 (2032) 20 (508)
32 MB optional max>
150 (3810) 100 (2540) 52 (1321)
Bar code modulus (“×”)
dimension
Ladder (rotated)
orientation
4.9 mil to 49 mil 3.9 mil to 39 mil 1.6 mil to 16 mil
Picket fence (nonrotated) 4.9 mil to 49 mil 3.33 mil to 33 mil 1.6 mil to 16 mil
Thin film printhead with Element Energy Equalizer (E
3
)
®
Yes Yes Yes
Physical Characteristics
Height
15.5 in. 393.7 mm
Width
10.37 in. 263.5 mm
Depth
19.5 in. 495.3 mm
Weight (without options)
50.0 lbs. 22.7 kg
To Next Page
Loading...
Need help?
General
