Zebra 110XiIII Plus Series User Manual

Page 3-4 110XiIIIPlus Maintenance Manual 13185L-002 Rev. A 1/24/06
Section 3 Troubleshooting
Pause Key Self Test
1. Refer to Figure 3-2. The initial self test prints 15 labels at a speed of 2 ips (inch per
second); then it automatically pauses the printer. Each time PAUSE is pressed, an
additional 15 labels print.
2. While the printer is paused, press CANCEL once to alter the self test. Now each
time PAUSE is pressed, the self test labels print at 6 ips. Fifteen additional labels are
printed each time PAUSE is pressed.
3. While the printer is paused, press CANCEL a second time to change the self test
print speed back to 2 ips. Each time PAUSE is pressed, 50 labels print.
4. While the printer is paused, press CANCEL a third time to change the self test print
speed to 6 ips. Each time PAUSE is pressed, 50 labels print.
5. While the printer is paused, press CANCEL a fourth time to change the self test
print speed to the printer’s fastest speed: 10 ips for the 200 dpi, 8 ips for the 300 dpi,
and 4 ips for the 600 dpi 110XiIIIPlus. Each time PAUSE is pressed, 50 labels print.
Figure 3-2. Pause Key Test Sample Label

Zebra 110XiIII Plus Series Specifications

General

Brand	Zebra
Model	110XiIII Plus Series
Category	Printer
Language	English