Zebra 110XiIII Plus Series User Manual

Page 2-30 110XiIIIPlus Maintenance Manual 13185L-002 Rev. A 1/24/06
Section 2 Operations Overview
Select Labels Per Roll
Press the right or left black oval key to display other choices.
This parameter needs to be updated when setting the Early Warning System so the printer
can provide early warnings when labels are running low.
Press NEXT/SAVE to display RIBBON LENGTH.
Select Ribbon Length
Press the Right or Left Black Oval key to display other choices.
This parameter needs to be updated when setting the Early Warning System so the printer
can provide early warnings when ribbon is running low.
Press NEXT/SAVE to display EARLY WARNING MAINTENANCE.
Select Early Warning Maintenance On/Off
This parameter tells the printer whether the Early Warning Maintenance is On or Off. If
the Early Warning Maintenance is On, the Head Cleaning alert is enabled.
Press NEXT/SAVE to display HEAD CLEANING.
This parameter tells the printer when to display the Clean Head alert.
Default: 900 labels
Selections: 100 labels–9999 labels
Default: 450 m (1476 ft.)
Selections: 100 m–450 m (328 ft.–1476 ft.)
Default: Maint. Off
Selections: Maintenance On, Maint. Off
LABELS PER ROLL
0501
RIBBON LENGTH
-450 M 1476 FT
EARLY WARNING
MAINT. OFF
Note • Head Cleaning displays only when Maintenance On is displayed.

Zebra 110XiIII Plus Series Specifications

General

Brand	Zebra
Model	110XiIII Plus Series
Category	Printer
Language	English