GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 3 - Setup Instructions 3-19
3-6-7 General Remarks and Hints when using external USB-Devices
3-6-7-1 External USB-Devices - Connection
When an external USB-storage device (such as a USB-memory stick or an external hard disk) is
connected to the LOGIQ P9/P7, Windows detects the device and automatically installs a driver. During
this process, several dialogs may pop up, starting with the “Found New Hardware“ dialog.
The device is then accessible using the drive letter the system assigned to it.
3-6-7-2 External USB-Devices - Disconnection
To stop the external device, press F3 EJECT
button.
!! WARNING:
Do not connect or disconnect any external USB-devices to or from the system while
scanning a patient! The appearing dialogs could distract you from the scan!
!! NOTICE:
When connecting external USB devices, be sure to execute Safety Directions found in the
LOGIQ P9/P7 Basic User Manual.
!! CAUTION:
Unplugging or ejecting USB devices without first stopping them can often cause the system to
crash and possibly result in loss of valuable data.
To Next Page
Loading...
Need help?
General
