Before making copies
1
C451 1-73
1.8 Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, OHP transparencies or label sheets.
1 Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2 With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3 Slide the lateral guides
to fit the size of paper
being loaded.
?
How is curled paper
loaded?
% Flatten the paper be-
fore loading it.
?
How many sheets of
paper and other me-
dia can be loaded?
% Do not load so many
sheets of plain paper
that the top of the
stack is higher than
the , mark.
Tray extension
Lateral
guides
To Next Page
Loading...
Need help?
General
