Managing jobs
10
C451 10-2
10 Managing jobs
10.1 Overview of Job List screen
Jobs
Specifying the desired copy settings, then pressing the [Start] key queues
the copy operation in this machine. This queued operation is called a job. In
the same way, operations for making scans and computer printouts are also
queued as jobs.
- Jobs that are being performed and the job log can be checked from the
Job List screens.
- Jobs are printed starting with the one at the top of the Current Jobs list.
- Jobs are numbered in the order that they were programmed and are
queued to be performed (printed).
2
Note
The job number identifies the job; it does not indicate the printing order.
In addition, the job number does not change until the job is deleted.
By using the “Increase Priority” function, the selected job can be moved
to the front of the queue so that it is printed first.
Multi-job feature
While one job is being printed, another job can be queued. A total of 251 jobs
can be queued.
The number of jobs possible for each operation is listed below.
Operation Number of jobs
Copy 5
Interrupted copy 1
Scan 5
TWAIN (Push, Pull) 1
Print 10
Fax (Quick Memory TX) 1
Fax (Memory TX) 50
Fax (Timer TX) 20
Fax RX 100
To Next Page
Loading...
Need help?
General
