Copy paper/original documents
6
C451 6-8
Auto tray switch feature
If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional LCT is installed, a maximum of 6,650 copies (with A4 v paper) can
be made continuously. (The paper tray is automatically switched only if the
“Auto Tray Switch ON/OFF” parameter in the Utility mode is set to “Allow”.)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- The paper trays are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to “System Settings” on
page 11-20.
Order for selecting paper trays
As a factory default, when a different paper tray is automatically selected, the
next paper tray in the following list is chosen.
Tray 1 → Tray 2 → Tray 3 → Tray 4 → LCT* → Bypass tray
* Appears only when the optional LCT is installed.
!
Detail
To change the order in which the paper trays are selected, refer to “Sys-
tem Settings” on page 11-20.
To Next Page
Loading...
Need help?
General
