Utility mode
11
C451 11-72
11.8 Finisher Adjustment
2-Position Staple Pitch Adjustment
The distance between staples when printing with the “2 Position” Staple set-
ting (“Staple” and “Center Staple & Fold”) can be adjusted.
2
Note
[2-Position Staple Pitch Adjustment] appears only if optional finisher FS-
608 is installed.
0 Before making any adjustments, use the “2 Position” Staple setting to
print a sample copy. Perform the adjustment while checking the sample
that was created.
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 11-56.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [1 2-Position Staple Pitch Adjustment].
The Adjust Spacing of 2 Staples screen appears.
To Next Page
Loading...
Need help?
General
