Utility mode
11
C451 11-88
Punch Regist Loop Size Adjustment
When printing with a Punch setting, the angle of punched holes along the
side of the paper can be adjusted.
2
Note
[Punch Regist Loop Size Adjustment] appears only if optional punch kit
is installed on the finisher.
For details on the Punch settings, refer to “Punching holes in copies
(Punch settings)” on page 2-93.
The adjustment range differs depending on the finisher that is installed.
0 Before making any adjustments, use a Punch setting to print a sample
copy. Perform the adjustment while checking the sample that was
created.
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Settings screen” on page 11-56.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [Punch Regist Loop Size Adjustment].
To Next Page
Loading...
Need help?
General
