Before making copies
1
C451 1-38
Scanning during warm-up
1 Press the sub power switch.
– For details on turning on the machine, refer to “Turning off the ma-
chine” on page 1-39.
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears.
The indicator on the [Start] key lights up in blue.
2 Check that the message “Warming up. Ready to scan.” appears on the
touch panel.
3 Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 2-8.
4 Specify any other desired copy settings.
5 Using the keypad, specify the desired number of copies.
– For details on specifying the number of copies, refer to “General
copy operation” on page 2-2.
6 Press the [Start] key.
The document is scanned, and the job is added to the list of queued
jobs.
To Next Page
Loading...
Need help?
General
