Utility mode
11
C451 11-49
Copier Setting
Parameter Description Default Setting
Auto Zoom (Platen) Select whether or not the “Auto” Zoom setting is
automatically selected when a paper tray is se-
lected (except when the “Auto” Paper setting is
selected) while a document is placed on the orig-
inal glass.
OFF
Auto Zoom (ADF) Select whether or not the “Auto” Zoom setting is
automatically selected when a paper tray is se-
lected (except when the “Auto” Paper setting is
selected) while a document is loaded into the
ADF.
ON
Specify Default Tray
when APS Off
Select which paper tray is selected when the “Au-
to” Paper setting is canceled.
• Tray Before APS ON:
The paper tray that was being used before the
“Auto” Paper setting was selected is selected.
• Default Tray:
Tray 1 is used.
Tray Before APS
ON
Select Tray for Insert
Sheet
Select the default paper tray loaded with paper for
the cover pages (front cover), inserted pages and
chapter title pages.
Tray 2
Print Jobs During
Copy Operation
Select whether or not print data or fax data can be
accepted for printing while a copy operation is be-
ing performed.
• Accept:
Print data and fax data can be accepted and
printed.
• Receive Only:
Print data and fax data is printed after the copy
operation is finished.
Accept
Tri-Fold Print Side Select whether the printed side is on the inside or
the outside when the page is folded in three.
This parameter is available only if optional Finisher
FS-608 is installed.
Outside
Automatic Image Ro-
tation
Select with which setting the image is automati-
cally rotated when the document and copy paper
orientations are different.
• When Auto Paper / Auto Zoom / Reduce is set:
If the “Auto” Paper setting, “Auto” Zoom set-
ting or a Reduce setting is selected, the image
is automatically rotated to fit the orientation of
the paper.
• When Auto Paper / Auto Zoom is set:
If the “Auto” Paper setting or “Auto” Zoom set-
ting is selected, the image is automatically ro-
tated to fit the orientation of the paper.
• When Auto Zoom / Reduce is set:
If the “Auto” Zoom setting or a Reduce setting
is selected, the image is automatically rotated
to fit the orientation of the paper.
• When Auto Zoom is set:
If the “Auto” Zoom setting is selected, the im-
age is automatically rotated to fit the orienta-
tion of the paper.
When Auto Paper/
Auto Zoom is set
To Next Page
Loading...
Need help?
General
