Basic copy operations
2
C451 2-96
2.13 Selecting a folding setting
By installing optional equipments, copies can be folded, or folded and bound
with staples at the same time, and then fed out. Available settings differ de-
pending on the optional equipments installed.
2
Note
Copies can be folded in half or bound at the center only if finisher FS-608
is installed or finisher FS-519 is installed with the saddle stitcher at-
tached.
Copies can be folded in three only if Finisher FS-608 is installed.
Setting Description Compatible
models
Half-Fold Select this setting to fold copies in half before feed-
ing them out. (Refer to page 2-97.)
FS-608
FS-519 + Saddle
Stitcher
Center Staple &
Fold
Select this setting to staple copies at two places
along the center, then fold the copies in half before
feeding them out. (Refer to page 2-100.)
FS-608
FS-519 + Saddle
Stitcher
Tri-Fold Select this setting to fold copies in three before feed-
ing them out. (Refer to page 2-104.)
FS-608
To Next Page
Loading...
Need help?
General
