Copy paper/original documents
6
C451 6-11
Selecting a paper size setting (Size Setting)
The paper size can be set for the bypass tray so that it can be used with the
specified paper size.
This is useful, for example, when the size of the paper that is loaded cannot
be automatically detected (such as with postcards or paper in inch sizes).
The following procedure describes how to specify the setting for postcards
loaded into the bypass tray.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Select the button for the bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General
