Basic copy operations
2
C451 2-55
4 Touch [Y] under “Set Individual Zoom”, and then use the keypad to
type in the desired zoom ratio (between 25.0% and 400.0%) for the Y
direction.
– To cancel changes to the settings, touch [Cancel].
5 Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
Selecting a stored zoom ratio
Copy zoom ratios that have been stored can be recalled to be used when de-
sired.
In addition, stored copy zoom ratios can be changed.
0 As the factory default, “Full Size” is selected.
0 Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio
in 0.1% increments.
0 Stored zoom ratios can be changed to desired zoom ratios. For details
on storing zoom ratios, refer to “Storing the desired zoom ratio” on
page 2-56.
To Next Page
Loading...
Need help?
General
