Basic copy operations
2
C451 2-44
2.6 Selecting a Paper Setting
The paper size can be selected automatically according to the document
size or it can be specified manually. Specify the paper size according to the
corresponding procedure, depending on the desired copy settings.
As the factory default, “Auto” is selected.
2
Reminder
When copying after selecting a paper tray with letterhead paper selected
as the paper type, the copy speed will be slow, even with single-sided
copying, since the paper alignment operation is performed.
2
Note
If a setting for special paper is selected for a paper tray, that tray is not
selected automatically with the “Auto” Paper setting. (However, a paper
tray set to “Single Side Only” is given priority to be selected with single-
sided printing.) Be sure to specify a paper setting when special paper is
loaded into a paper tray. For details, refer to “Specifying a setting for spe-
cial paper” on page 6-21.
If the “Auto Paper Select” was selected at the “Auto Zoom” setting, the
Zoom screen appears. Touch the button for the desired zoom ratio.
The “Auto” Paper setting cannot be combined with the “Auto” Zoom Set-
ting.
For details on specifying the priority of paper trays, refer to “Specifying
user settings” on page 11-20.
To Next Page
Loading...
Need help?
General
